====== Android controller setup ====== **Coming soon. Currently in beta.** [[https://displayhub.us/beta/?app=controller|Request consideration into the beta program]]. Public APK downloads are paused. ===== Dedicated local control ===== The controller manages discovery, screen assignments, network remotes, and configuration. It is not an HDMI encoder. Use a separate device for every role. - Use ARM64 Android 9 or later and reliable charging. - Once invited, install the Controller app using the private beta instructions. - Open the app; allow notifications and background operation. - Wait for initial runtime preparation. - Open ''http://displayhub.local:8081/'' or ''http://CONTROLLER_IP:8081/'' on the same LAN. - Save a router DHCP reservation and use the full controller URL on encoders. The .local address requires multicast DNS support and no conflicting hostname. For a .lan address, configure your router's local DNS yourself; the app does not set router DNS. ===== Android boundaries ===== Android-hosted management does not supply desktop ADB/SDB/SSH player deployment, Android TV/Fire TV ADB remote-key tooling, operating-system reboot, or router Wi-Fi administration. Use supported store/manual installation methods. Samsung first-use discovery remains device/firmware dependent and requires qualification. Force-stop prevents normal automatic restart until you reopen the app. Boot/unlock behavior and manufacturer battery rules need real-device testing. [[:troubleshooting:android-health|Check power and background behavior]]. ===== Updates and support ===== Use App updates to check/download, then approve installation on the Android device. Keep the existing installation for normal production updates. [[:support:remote-support|Remote support]] is initiated from the controller only when instructed by a trusted agent. ---- [[:start|Knowledge home]] | [[:getting-started|Getting started]] | [[https://discord.gg/B6aSSdwFHy|Ask in Discord]]