====== Android encoder setup ====== **Coming soon. Currently in beta.** [[https://displayhub.us/beta/?app=encoder|Request consideration into the beta program]]. Public APK downloads are paused. ===== Capture one HDMI source ===== Use a dedicated ARM64 Android 8+ device with USB host/OTG and hardware H.264. A hub's HDMI output is not an HDMI capture input. - Connect authorized HDMI source -> UVC capture dongle -> hub data port -> Android device. - Connect the charger to the hub's charging input. - Once invited, install the Encoder app using the private beta instructions. - Open DisplayHUB Encoder and grant the required camera, selected audio, notification, and USB permissions. - Choose Always open DisplayHUB for the capture device when offered. - Permit background operation and optionally choose DisplayHUB as the Home app. - Complete setup, then manage at ''http://ENCODER_IP:8080/''. Your one controller per location is discovered on the LAN. Verify its saved address includes '':8081''. Start this input at 1080p30 (Full HD) and approximately 6,000 kbps when supported; lower quality if necessary. Capture starts when the configured app opens; there is no normal browser Start/Stop workflow. ===== Check before unattended use ===== Test USB audio, sustained charging balance, temperature, screen-off operation, first unlock after restart, and recovery after USB/network interruptions. Some Android devices still need you to reopen the app or approve USB access. An empty battery does not guarantee automatic power-on after charging resumes. ===== Supported capabilities ===== USB HDMI capture, hardware H.264, AAC/HLS, Opus/WebRTC, and [[:encoder:overlays|layered overlays with visual examples]] are supported. Capture modes depend on USB and hardware codec capabilities. File/network primary input, SRT, and board-specific maintenance are not Android encoder features. Protected HDMI may not be capturable; no content-protection bypass is provided. {{:screenshots:overlay-example.png?800|Example overlays rendered by the real editor over TV color bars, not applied to the live encoder}} Normal production updates retain settings and require Android installation approval. [[:encoder:updates|Update details]]. ---- [[:start|Knowledge home]] | [[:getting-started|Getting started]] | [[https://discord.gg/B6aSSdwFHy|Ask in Discord]]