DisplayHUB / compare displayhub

HDMI Matrix vs DisplayHUB: Cost & Setup

Compare HDMI matrix switch, HDBaseT, and AV-over-IP installation costs with DisplayHUB. See how a local-network sports bar TV matrix can save thousands.

Why pay for a rack full of fixed ports when you can start with devices you already own? DisplayHUB combines one Android controller per location, expandable encoder inputs, and supported TV players on your private network. The Android apps host the local software; staff configure the system and route screens from a browser on any device on that network.

Ready to estimate your own setup? Build an equipment shopping list, or reuse compatible hardware you already have.

Scroll horizontally to see the full comparison.

Planning ranges from DisplayHUB's published system comparison. Equipment configurations, labor, taxes, and current vendor prices vary.
SystemPublished cost exampleExpansion and cablingInstallation
DisplayHUBFree core software
Compatible hardware separately; optional paid display licenses
Start with one encoder input, add more as needed. Use your suitable private network and supported players.DIY-friendly host-app and browser setup; Android apps host the software, while browser pages handle configuration and routing. No central matrix rack or dedicated long HDMI run to each TV required.
Monoprice Blackbird HDMI Matrix$1,000-$2,000+Fixed port counts, such as 8×8 or 16×16; HDMI wiringModerate to complex
Gefen 4×4 HDMI Matrix$2,000+Limited input/output count; HDMI cablingProfessional installation commonly needed
HDTV Supply 16×16 CAT6 / HDBaseT Matrix$1,000 base-$5,500+Chassis capacity; CAT6 plus transmitters/receiversAdvanced installation
Generic AV over IP$2,000-$10,000+Ethernet plus dedicated transmitters/receivers at endpointsTechnical network and AV setup

A 16-screen venue makes the difference clear.

HDMI matrix installation

$10,000-$20,000+

Published 16-screen planning example: matrix hardware, distribution endpoints, cabling, and installation can add up quickly.

AV-over-IP installation

$5,000-$15,000+

Published 16-screen planning example: dedicated transmitters/receivers and technical setup remain part of the project.

These are indicative planning ranges, not like-for-like current quotes or a promise of a $0 complete installation. DisplayHUB still needs compatible devices, USB capture hardware, powered hubs, a suitable network, power, and source-to-capture HDMI cables. Paid licenses recur separately. The published comparison lists $2-$5 per display as a reference range; check Stripe for your exact current rate and billing interval.

Less wiring work. More room to change your mind.

Traditional systems can mean racks, cable pulls, fixed port limits, and specialist setup. DisplayHUB lets you begin by installing the Android host apps and proving one input-to-screen path in a browser. Add another encoder input or TV without replacing a fixed-size matrix, as long as your network has capacity.

Daily control stays in the browser interface: choose inputs, route screens, use supported IR remotes, and switch supported Shelly plugs for compatible equipment beyond TVs. See the integrated controls.

Dedicated AV systems can still be the right choice for strict timing, uncompressed video, or specialist installation requirements. Player delay and synchronization vary; Roku uses buffered HLS.