DisplayHUB / quick start
DisplayHUB Setup Guide: Six Easy Steps
Plan a DisplayHUB setup with one Android controller, encoder inputs, and compatible TV players on your private network.
Start with one TV and the HDMI source you want to use. Keep your existing source devices and TV wiring in place; put an encoder beside each source and add a compatible HDMI splitter where needed to keep the current feed connected. You do not need to configure every feature today. Get video playing first, then explore everything DisplayHUB can do.
Step 1 / Put everything on the table
A small setup is all you need.
- One Android phone or tablet for your controller. You only need one controller per location; it manages all your inputs and screens.
- One more Android device for your first encoder input. Each encoder is one HDMI input. Start with one and add as many inputs as you need, within your network's capacity.
- For each input: a powered USB charging/data hub, USB HDMI capture dongle, charger, and HDMI cable. The hub lets the encoder charge while the capture dongle uses USB data.
- A compatible HDMI splitter at the source if you need to keep its current HDMI connection in place.
- A TV or streaming device that can run the DisplayHUB player app.
- Optional: a TView USB IR blaster if you want to send remote-control commands to a compatible source.
Bring compatible equipment you already have, read the equipment buying guide, or build a personalized equipment shopping list. Start small and expand or change your setup later.
Optional: a phone stand with cooling fan (opens in a new tab) can keep each encoder organized and tidy while providing extra airflow. It is not required; check its power needs and monitor temperature during sustained use.
Keep controller, encoder inputs, and TV players on separate devices. A controller needs ARM64 Android 9+; an encoder needs ARM64 Android 8+, USB host support, and hardware H.264. If you are unsure about a phone or hub, ask before buying.
As an Amazon Associate, DisplayHUB earns from qualifying purchases through hardware links, at no extra cost to you. Check the listing and your Android device's charging/data compatibility.
Step 2 / Give your devices a place to talk
Use a private network, not a public cloud dashboard.
Your existing password-protected venue network is fine. Or create a separate private Wi-Fi network just for DisplayHUB. Connect the controller, all encoder inputs, TVs, and the phone or laptop you will manage them from to that same network.
The browser page is served by your Android controller inside the building. It is not a public internet control panel. Do not use public guest Wi-Fi. Allow the DisplayHUB devices to talk to each other, keep guests separate, use Ethernet where practical, and do not open router ports to the internet.
If the internet drops, local control and available local-source playback can continue while your LAN and devices stay powered. A prolonged outage may cause a licensing watermark. An internet-fed channel still needs internet; DisplayHUB cannot keep the provider’s source online.
Step 3 / Install once per location
This Android device is your controller.
Installing outside Google Play: If you downloaded the Controller APK using the button below and Android asks whether your browser or file manager can install unknown apps, tap Settings, enable Allow from this source, then return to the installer and tap Install. If Play Protect explicitly says Harmful app blocked, do not override it. Keep Play Protect enabled and report the exact warning and APK version to DisplayHUB support.
DisplayHUB Controller — latest release is available for ARM64 Android 9 and later.
- Download the APK to your chosen controller device.
- Open the downloaded file. If Android asks you to approve installation, follow the prompts on that screen.
- Open DisplayHUB Controller. Approve its on-screen prompts and let it run in the background. The first launch can take a few minutes.
- Leave this one device powered and connected to your private network for the whole location.
Scan to download ControllerStep 4 / Start with one input, add more later
Each encoder handles one input.
Use a different Android device for each source you want available at the same time. For an HDMI source such as a DIRECTV or Xumo box, follow the capture wiring below. If a source already feeds your current system, place a compatible HDMI splitter beside it: keep one output connected as it is today and connect the other to the encoder. The Android Encoder also supports compatible HDHomeRun network tuners, video files, and direct video URLs without an HDMI dongle; see encoder input options for limitations. You do not need another controller when you add an input.
DisplayHUB Encoder — latest release is available for ARM64 Android 8 and later.
- Download the APK to the Android device you want to use as an encoder.
- Open the downloaded file, install DisplayHUB Encoder, and approve the camera, audio, notification, and USB prompts as they appear.
- Connect your charger to the hub charging port. Connect the hub to the Android device.
- Connect the source's HDMI output or the spare output of its splitter to the HDMI capture dongle, then plug that dongle into a USB data port on the hub. A hub's HDMI output is not a capture input.
- If Android asks which app should open the USB device, choose DisplayHUB Encoder and Always open when offered.
Scan to download EncoderKeep the encoder app open while you finish setup. Its screen shows the browser address for that input, such as http://192.0.2.20:8080/; use the actual address displayed on your device. Start at 1080p (Full HD), 30 fps and approximately 6,000 kbps when supported. Lower the setting if a device or network struggles.
For unattended startup: On dedicated, physically secured devices, follow the screen-lock and cold-boot checklist. The Controller starts in the background; choose DisplayHUB Encoder as the Android Home app so capture starts when it opens.
Adding the optional USB IR blaster?
Plug the supported TView USB IR blaster into a hub USB data port and approve Android's USB prompt. In the encoder's browser Settings, use USB IR Blaster to choose a suitable remote profile. Point the transmitter at your source. Use either network control or USB IR for that source, not both. IR is optional; skip it until video is playing. Detailed source-control guide.
Step 5 / Put a player on each TV
Search your TV's app store for DisplayHUB.
Open the app store on your TV or streaming device, search for DisplayHUB, install the player, and open it. Keep it on the same private network. Accept any pairing prompt you see on the real TV.
Android TV / Google TVPlayer setup & store links →
Amazon Fire TVPlayer setup & store links →
RokuPlayer setup & store links →
Samsung TizenPlayer setup & store links →
LG webOSPlayer setup & store links →Store availability varies by model and region. Do not install the Controller or Encoder app on your TV in place of the player.
Step 6 / Open the dashboard and pick a screen
You are ready to connect the pieces.
After installing the apps, use a phone, tablet, or computer on the same private network and open:
- If that name does not open, use the IP address shown in the Controller app, keeping :8081 at the end.
- Find your encoder input and TV in the dashboard. Open Matrix or choose Use as Source on the encoder card.
- Choose the TV that should play that input. Check video and sound on the TV.
- To grow, install another player on another TV, or repeat the Encoder steps for another HDMI input. Keep the same one controller per location.
Leave the Android devices powered, physically accessible, and allowed to run in the background. Check charging, heat, audio, and recovery after a restart. Think of this as your virtual splitter/matrix, not a source of programming. Protected HDMI may not be capturable; confirm commercial viewing and distribution permissions. DisplayHUB does not provide legal advice.
Your first video stream. Plenty of room to grow.
Start simple. Unlock the power when you are ready.
Once you have a working video source and screen, explore the paid overlay editor, source remotes, built-in EPGs to find programs and tune channels where source controls allow it, and room layouts at your own pace. Supported Shelly plugs can switch compatible signs and amplifiers; network or USB IR blasters can control compatible equipment beyond TVs. Follow accessory load ratings and setup guides.


Once video is playing, explore the editor and digital-signage-style examples at your own pace. See the powerful editor and examples.
Start here