DisplayHUB / Knowledge wiki
Source control: DIRECTV, Xumo, and USB IR
Use only provider-authorized equipment and commercial content rights. A distribution app does not create programming entitlements.
For supported network-controlled sources, configure the correct device type and local IP and enable the provider/device's local-control option where available. Test tuning separately from HDMI capture.
For Android encoder USB IR, use the supported TView transmitter and approve Android USB access. It is send-only. Choose either the network control address or USB IR, not both. Leave the connected-device IP blank for USB IR. The Xumo profile is bundled; installing other supported IR profiles can require internet.
HDHomeRun/file primary input is not implemented by the Android encoder; do not select a legacy input expecting it to work. A separately authorized HDMI source can still be evaluated through the normal capture path.
See equipment, settings, and epg.
Read-only public knowledge base, maintained through the site's deployment files. Powered by DokuWiki. Device and firmware behavior must be qualified on your actual equipment.
Start here