DisplayHUB / Knowledge wiki

Android encoder setup

Choose an input

Use a dedicated ARM64 Android 8+ device with hardware H.264. USB host/OTG is needed for HDMI capture. A hub's HDMI output is not an HDMI capture input.

  1. For HDMI: connect an authorized source → UVC capture dongle → hub data port → Android device. Connect the charger to the hub's charging input.
  2. The apps are coming soon and currently in beta. Request Encoder beta consideration for installation instructions.
  3. Open DisplayHUB Encoder and grant the required camera, selected audio, notification, and USB permissions.
  4. If using a dongle, choose Always open DisplayHUB for the capture device when offered.
  5. Permit background operation and optionally choose DisplayHUB as the Home app.
  6. Complete setup, then manage at http://ENCODER_IP:8080/.

Without an HDMI dongle, open Advanced Settings → Input Source, select Video File, upload an authorized H.264 MP4 up to 64 MB, and select Apply Advanced. The file loops without its own audio. HDMI capture becomes available only when compatible hardware is detected.

Your one controller per location is discovered on the LAN. Verify its saved address includes :8081. Start this input at 1080p30 (Full HD) and approximately 6,000 kbps when supported; lower quality if necessary. Capture starts when the configured app opens; there is no normal browser Start/Stop workflow.

Check before unattended use

Test USB audio, sustained charging balance, temperature, screen-off operation, first unlock after restart, and recovery after USB/network interruptions. Some Android devices still need you to reopen the app or approve USB access. An empty battery does not guarantee automatic power-on after charging resumes.

Supported capabilities

USB HDMI capture, primary video-file playback, hardware H.264, AAC/HLS, Opus/WebRTC, and layered overlays are supported. Capture modes depend on USB and hardware codec capabilities. Network primary input, HDHomeRun tuner input, SRT, and board-specific maintenance are not Android encoder features. Protected HDMI may not be capturable; no content-protection bypass is provided. Available overlay controls appear directly below the video preview.

Normal production updates retain settings and require Android installation approval. Update details.


Knowledge home | Getting started | Ask in Discord

Read-only public knowledge base, maintained through the site's deployment files. Powered by DokuWiki. Device and firmware behavior must be qualified on your actual equipment.