DisplayHUB / Knowledge wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
android:controller [2026/11/19 21:13] – external edit 127.0.0.1android:controller [2026/11/19 23:24] (current) – external edit 127.0.0.1
Line 8: Line 8:
  
   - Use ARM64 Android 9 or later and reliable charging.   - Use ARM64 Android 9 or later and reliable charging.
-  - The apps are coming soon and currently in beta. [[https://displayhub.us/beta/?app=controller|Request Controller beta consideration]] for installation instructions.+  - [[https://displayhub.us/download/controller/|Download DisplayHUB Controller]] for direct installation. The Controller is not distributed through Google Play because of Play Store restrictions; no Google, Play Store, or DisplayHUB account is needed to install or run it.
   - Open the app; allow notifications and background operation.   - Open the app; allow notifications and background operation.
   - Wait for initial runtime preparation.   - Wait for initial runtime preparation.
-  - Open ''http://displayhub.local:8081/'' or ''http://CONTROLLER_IP:8081/'' on the same LAN.+  - From a browser on any device on the same trusted LAN, open ''http://displayhub.local:8081/'' or ''http://CONTROLLER_IP:8081/''.
   - Save a router DHCP reservation and use the full controller URL on encoders.   - Save a router DHCP reservation and use the full controller URL on encoders.
 +
 +The Android app hosts the local software. Use the browser for routine configuration, dashboard operation, and Matrix routing; the app screen is not the operator interface. No account is needed for local browser control.
  
 The .local address requires multicast DNS support and no conflicting hostname. For a .lan address, configure your router's local DNS yourself; the app does not set router DNS. Keep the DisplayHUB system and its TVs on a dedicated trusted network or VLAN, separate from personal/work devices and untrusted clients, while allowing the local communication the system needs. The .local address requires multicast DNS support and no conflicting hostname. For a .lan address, configure your router's local DNS yourself; the app does not set router DNS. Keep the DisplayHUB system and its TVs on a dedicated trusted network or VLAN, separate from personal/work devices and untrusted clients, while allowing the local communication the system needs.

Read-only public knowledge base, maintained through the site's deployment files. Powered by DokuWiki. Device and firmware behavior must be qualified on your actual equipment.