DisplayHUB / Knowledge wiki
This is an old revision of the document!
Table of Contents
Android encoder setup
Coming soon. Currently in beta. Request consideration into the beta program. Public APK downloads are paused.
Capture one HDMI source
Use a dedicated ARM64 Android 8+ device with USB host/OTG and hardware H.264. A hub's HDMI output is not an HDMI capture input.
- Connect authorized HDMI source → UVC capture dongle → hub data port → Android device.
- Connect the charger to the hub's charging input.
- Once invited, install the Encoder app using the private beta instructions.
- Open DisplayHUB Encoder and grant the required camera, selected audio, notification, and USB permissions.
- Choose Always open DisplayHUB for the capture device when offered.
- Permit background operation and optionally choose DisplayHUB as the Home app.
- Complete setup, then manage at
http://ENCODER_IP:8080/.
Your one controller per location is discovered on the LAN. Verify its saved address includes :8081. Start this input at 1080p30 (Full HD) and approximately 6,000 kbps when supported; lower quality if necessary. Capture starts when the configured app opens; there is no normal browser Start/Stop workflow.
Check before unattended use
Test USB audio, sustained charging balance, temperature, screen-off operation, first unlock after restart, and recovery after USB/network interruptions. Some Android devices still need you to reopen the app or approve USB access. An empty battery does not guarantee automatic power-on after charging resumes.
Supported capabilities
USB HDMI capture, hardware H.264, AAC/HLS, Opus/WebRTC, and layered overlays with visual examples are supported. Capture modes depend on USB and hardware codec capabilities. File/network primary input, SRT, and board-specific maintenance are not Android encoder features. Protected HDMI may not be capturable; no content-protection bypass is provided.
Normal production updates retain settings and require Android installation approval. Update details.
Read-only public knowledge base, maintained through the site's deployment files. Powered by DokuWiki. Device and firmware behavior must be qualified on your actual equipment.
Start here 