DisplayHUB / Knowledge wiki

This is an old revision of the document!


Controller dashboard

Open http://CONTROLLER_IP:8081/dashboard on the trusted LAN. The dashboard groups encoders, players, supported IR devices, and supported power accessories.

Controller dashboard with four simulated encoders and example guide, remote and overlay buttons

This current interface uses simulated encoders and color-bar previews; it is not live venue data. Device counts reflect discovery and do not prove successful playback.

Encoder cards show available status and Configure, Use as Source, and Game Plan actions. Configure opens that encoder's management page, including Android port 8080. Matrix and source assignments use the same tab on Android; the EPG, on-screen remotes, Game Plan, IR Blaster Settings, and Overlay Editor can open separately.

When configured and supported, Open EPG opens a source's guide and a remote button opens its network, encoder USB IR, or associated blaster remote. Availability depends on the source and setup. Paid subscribers with compatible updated software can toggle individual overlay layers immediately below the preview; Full-frame / hide overlays and Restore layout / overlays switch between full-frame video and the saved layout. See overlays.

The decoder area groups screens and provides platform-dependent app, remote, IR and associated plug controls. IR Blasters and Shelly Plugs have their own panels and may also offer controls on associated device cards. Check the target before using an individual or all-device command.

Use matrix to select a source and assign screens. See encoders, players, and controller.


Knowledge home | Getting started | Ask in Discord

Read-only public knowledge base, maintained through the site's deployment files. Powered by DokuWiki. Device and firmware behavior must be qualified on your actual equipment.