DisplayHUB / Knowledge wiki

Encoder quality, bitrate, and compatibility

Start at 1080p (Full HD), 30 fps, approximately 6,000 kbps when supported, and verify all players. Lower quality if a player or network struggles. USB capture modes and hardware-codec capabilities determine available choices.

Lower bitrate does not reduce the pixels a player must decode per second. For an older display, also reduce resolution/frame rate. Above Full HD, carefully qualify every player and the network; do not infer compatibility from encoder capability alone.

The Android encoder requests H.264 compatibility settings below UHD. Requested profile and target bitrate are not measurements of the final bitstream. Hardware can overshoot a target; compare actual output under sustained load.

Check sound, delay, network load, charging, and thermals together. See playback and android-health.


Knowledge home | Getting started | Ask in Discord

Read-only public knowledge base, maintained through the site's deployment files. Powered by DokuWiki. Device and firmware behavior must be qualified on your actual equipment.