DisplayHUB / Knowledge wiki

Consent-based remote support

The controller is the normal entry point. Only when instructed by a trusted DisplayHUB agent, open /support on the local controller, enter the supplied code, and choose Connect Support. Opening the page alone does not connect.

Share the connected Support ID with the agent privately. Registered reachable encoders can be managed through that controller session; they do not need an independent encoder tunnel. The current Encoder APK does not provide a separate support tunnel.

Access is limited to app diagnostics and supported network operations, not Android screen control or unrestricted device administration. End Session closes access without stopping the controller. Temporary sessions expire after one hour and do not automatically resume after restart.

Do not share a code or Support ID publicly and do not enable a session for an unsolicited stranger. Free troubleshooting starts in Discord.


Knowledge home | Getting started | Ask in Discord

Read-only public knowledge base, maintained through the site's deployment files. Powered by DokuWiki. Device and firmware behavior must be qualified on your actual equipment.